Changing The Quantity Of Coff Ee In The Cup - Atag CM 4111 AC Bedienungsanleitung

YOUR COFFEE MACHINE
While the appliance is running off coff ee, never remove the water
tank. If it is removed, the appliance will not be able to make the
coff ee. If the appliance malfunctions, do not contact the service
centre straight away. Th e problem can almost always be resolved
by following the instructions indicated on pages 30 until 33.
If this is not the case, or for further explanations, contact the
customer service.

5.2.3 Changing the quantity of coff ee in the cup

Th e appliance is factory preset to automatically deliver the following
quantities of coff ee:
- espresso cup;
- small cup;
- medium cup;
- large cup;
- mug.
To change these quantities, proceed as follows:
1. Press the MENU button
until the menu option COFFEE PROGRAM appears. Confi rm
the menu option with the OK button.
2. Select the cup size you want to change with the scrolling buttons
< or >. When the desired cup size is displayed, confi rm it with the
OK button.
3. A bar appears on the display, which can be made bigger or smaller;
this represents the cup fi lling quantity. A diff erent fi lling quantity
can be selected using the scrolling buttons < or > in 10 steps.
When the bar is completely full, this represents the max. cup
fi lling quantity of about 220 ml.
4. Select the desired cup fi lling quantity and confi rm it with the OK
button. Th is fi lling quantity is now programmed in. (If OK is not
pressed, the appliance automatically returns to the coff ee mode
after about 120 seconds without saving the entries).
After programming the display automatically jumps back to the
menu option for setting the fi lling quantity, e.g. ESPRESSO CUP.
To go back to the coff ee mode immediately, press the MENU
button twice or wait about 120 seconds until the appliance
automatically jumps back to coff ee mode.
GB 13
and press the scrolling buttons < or >
5 Use