Atag CM 4111 AC Bedienungsanleitung Seite 128

YOUR COFFEE MACHINE
26
27
A
E
B
C
D
28
29
5. Carefully clean the inside of the machine. Scrape off the encrusted
coff ee in the coff ee machine using a wooden or plastic fork or
something similar that will not scratch the fi nish (fi g. 26).
6. Remove all the remains with a vacuum cleaner (fi g. 27).
7. Replace the brewing unit (A) by pushing it into the holder (B)
and the pin (C). Th e pin must be introduced into the tube (D)
at the bottom of the brewing unit. Now push fi rmly where it says
PUSH (E) until the brewing unit is heard fastening into place
(fi g. 28).
8. Once you have heard the unit clicking into position, make sure
that the red buttons have snapped back out, otherwise the service
door cannot be closed.
º Th e two red buttons are correctly snapped out (fi g. 29).
GB 22
6 Maintenance