Atag CM 4111 AC Bedienungsanleitung Seite 126

YOUR COFFEE MACHINE
5.2.12 Setting the cappuccino programme
Th e quantities of milk and coff ee required to make a cappuccino are
preset to normal levels at the factory. You can adjust and change these
to suit your taste.
1. Press the MENU button
until the menu option CAPPUCCINO PROGRAM appears.
Confi rm the menu option with the OK button.
2. Th e display shows MILK VOLUME. If you want to change and
save the milk quantity used to make a cappuccino, confi rm the
menu option with the OK button.
3. A bar appears on the display; this represents the milk quantity
used to make a cappuccino. If necessary a diff erent fi lling quantity
can be selected using the scrolling buttons < or > in 10 steps.
When the bar is completely fi lled, this represents the max. milk
quantity for the cappuccino programme of about 120-180 ml
(depending on the set amount of froth).
4. When the desired fi lling quantity is displayed, confi rm it with
the OK button. Th is fi lling quantity is now programmed in. (If
OK is not pressed, the appliance automatically returns to the
coff ee mode after about 120 seconds without saving the entries).
Th e display automatically jumps back to the menu option MILK
VOLUME after programming.
5. If you want to change and save the coff ee quantity used to make
a cappuccino, press the scrolling buttons < or > until the menu
option COFFEE FOR CAPPUCC. appears. Confi rm the menu
option with the OK button.
6. A bar appears on the display; this represents the coff ee quantity
used to make a cappuccino. If necessary a diff erent fi lling quantity
can be selected using the scrolling buttons < or > in 10 steps.
When the bar is completely full, this represents the max. coff ee
quantity for the cappuccino programme of about 220 ml.
7. When the desired fi lling quantity is displayed, confi rm it with the
OK button. Th is fi lling quantity is now programmed in. (If OK
is not pressed, the appliance automatically returns to the coff ee
mode after about 120 seconds without saving the entries). Th e
display automatically jumps back to the menu option COFFEE
FOR CAPPUCC. after programming.
To go back to the coff ee mode, press the MENU button twice
or wait about 120 seconds until the appliance automatically jumps
back to coff ee mode.
GB 20
and press the scrolling buttons < or >
5 Use
,