Faults; Problems That Can Be Resolved Before Calling The Service Centre - Atag CM 4111 AC Bedienungsanleitung

YOUR COFFEE MACHINE
Problems that can be resolved
PROBLEM
Coff ee is not hot.
Th e coff ee does not have
enough crema.
Coff ee comes out too slowly. Th e coff ee is ground too fi ne.
Coff ee comes out too
quickly.
Coff ee only comes out of
one of the spouts on the
coff ee dispenser.
If the coff ee machine does not work, you can easily fi nd out the cause
of the problem and fi x it by turning to the advice in chapter 7. If, on
the other hand, the coff ee machine displays no message, please carry
out the following checks before consulting customer services.
CAUSE
Th e cups were not preheated.
Th e brewing unit is too cold.
Th e coff ee is too coarsely
ground.
Th e coff ee blend is not
suitable.
Th e coff ee is too coarsely
ground.
Th e holes on the spouts are
blocked.
GB 32

8 Faults

SOLUTION
Preheat the cups by rinsing
them out with warm water
(see 5.2.2 on page 11 and 12:
'Tips to make hotter coff ee').
Warm up the brewing unit
with the rinsing programme
before making coff ee (see
6.2.6 on page 28).
Turn the knob for the grind
level setting one position
anti-clockwise (see 5.2.4 on
page 14).
Use a coff ee blend suited
to fully automated coff ee
machines.
Turn the knob for the grind
level setting one position
clockwise (see 5.2.4 on
page 14).
Turn the knob for the grind
level setting one position
anti-clockwise (see 5.2.4 on
page 14).
Remove the dry coff ee
residues with a needle (see
6.1.1 on page 21, fi g. 24).