Atag CM 4111 AC Bedienungsanleitung Seite 115

YOUR COFFEE MACHINE
2
3
3. Th e display now shows INSERT WATER SPOUT! Insert the hot
water spout and place a cup underneath. (fi g. 2).
4. Th e display shows PRESS MENU. Press the MENU button
After a few seconds some water comes out of the hot water spout.
When the cup is fi lled with about 30 ml of water, the progress bar
is completed.
5. Th e display now shows TURNING OFF... PLEASE WAIT...
Th e appliance switches off .
6. Extract the appliance by pulling it outwards taking care to use the
special handles. Open the lid and fi ll the container with coff ee
beans (fi g. 3). Th en close the lid and push inwards the appliance.
To prevent malfunctions, never fi ll with ground coff ee, frozen
or caramelised coff ee beans or anything else that could damage
the appliance.
7. Press the on/off button
HEATING UP... PLEASE WAIT... Th e appliance is heating up.
8. When the appliance has fi nished heating up it displays:
RINSING. Th e appliance performs an automatic rinse cycle (a
little hot water comes out of the coff ee dispenser and is caught in
the drip tray).
If you want to make a short coff ee (less than 60 cc), to make it
hotter, fi ll the cup with this hot rinsing water fi rst. You can also
use the menu setting RINSING (see 6.2.6 on page 28).
9. Th e appliance now displays the basic settings, i.e. the cup size on
the top line of the display and the coff ee strength on the bottom
line, e.g.: MEDIUM CUP NORMAL TASTE.
GB 9
on the control panel. Th e display shows
5 Use
.