Atag CM 4111 AC Bedienungsanleitung Seite 133

YOUR COFFEE MACHINE
Make sure that any splashes from the descaling agent do not
come into contact with surfaces that are sensitive to acids, such
as marble, limestone and ceramic.
6. Put a container with a capacity of at least 1.5 litres underneath the
hot water nozzle (see fi g. 2 on page 9).
7. Press the MENU button
8. Th e descaling liquid runs out of the hot water nozzle.
9. Th e descaling programme automatically goes through a serie of
rinses and pauses to remove limescale deposits from the inside of
the coff ee machine.
10. After about 30 minutes the water tank is empty and the top line
of the display alternates between DESCALE COMPLETE and
PRESS MENU KEY.
11. Press the MENU button
TANK!
12. Th e appliance is now ready for a rinsing process with clean water.
Empty the container under the hot water nozzle and put it back
under the hot water nozzle.
13. Take out the water tank and fi ll it with clean water.
14. Put the water tank back in place. Th e display shows: RINSING,
PRESS MENU KEY.
15. Press the MENU button
clean water and the rinsing water runs out of the hot water nozzle.
16. After a few minutes the water tank is empty and the display shows
RINSING COMPLETE, PRESS MENU KEY.
17. Press the MENU button
18. Take out the water tank, fi ll it with clean water and put it back in
place.
19. Th e appliance is now ready for use again and is back to the last
coff ee mode selected.
If the descaling cycle is interrupted before completion, the
appliance continues to display the descale message and the
programme must be started again from the beginning.
Failure to descale the appliance regularly invalidates the
guarantee.
GB 27
6 Maintenance
. Th e display shows DESCALING.
. Th e display shows RINSING, FILL
. A rinsing process takes place with
. Th e display shows FILL TANK!