Use; Preparation - Atag CM 4111 AC Bedienungsanleitung

YOUR COFFEE MACHINE

5.1 Preparation

1
Th e fi rst time you switch on the appliance and every time that it is
plugged in, the appliance makes a SELF-DIAGNOSIS operation
when you press the main ON/OFF switch (see A on page 5). Th en
the appliance switches off .
To turn it on, press the on/off button
1. Th e fi rst time you use the appliance, select the language. Press the
main ON/OFF switch on the right side of the appliance (see A on
page 5); the lights on the front side and the display go on. Wait
for the appliance to display PRESS MENU FOR ENGLISH.
Press the menu button
displays ENGLISH. Th e appliance then displays the setting
message in English.
2. After a few seconds, the appliance displays FILL TANK! To fi ll
it, remove the tank (fi g. 1), rinse and fi ll with fresh water. Never
exceed the MAX line. Put the tank back and push it as far as it
will go.
Only fi ll the water tank with cold water. Never fi ll it with other
liquids such as mineral water or milk.
To ensure good, aromatic coff ee at all times, you should:
- change the water in the water tank every day;
- clean the water tank with normal water for rinsing (not in the
dishwasher) at least once a week. Th en rinse off with fresh water.
GB 8
on the control panel.
for at least 3 seconds until the appliance

5 Use