Appendices; Disposal Of Appliance And Packaging; Technical Data - Atag CM4511AC Bedienungsanleitung

APPENDICES

Disposal of appliance and packaging

Technical data

The packaging of this appliance is recyclable and may have been made
of:
• cardboard
• paper
• polythene foil (PE)
• CFC-free polystyrene (PS hard foam)
• polypropylene tape (PP).
Dispose of these materials in a responsible manner and in accordance
with government regulations.
The appliance carries the symbol of a crossed-out dustbin to state that
segregated processing is compulsory to avoid any negative effects on
the environment and public health. This means that at the end of its
working life, you must hand it in at a special refuse collection centre run
by your local authority or dealer.
Segregated processing enables the recovery of the materials used in
the production of this appliance, thus saving considerably in terms of
raw materials and energy.
Declaration of conformity
We declare that our products meet the applicable European Directives,
Decisions and Regulations and the requirements listed in the standards
referenced.
The appliance complies with the following EC directives:
• Low Voltage Directive 2006/95/EC and subsequent amendments;
• EMC Directive 2004/108/EC and subsequent amendments;
• EC Regulation 1275/2008 for standby
• Materials and accessories coming into contact with food conform to
European regulation (EC) no. 1935/2004.
The data plate on the side of the appliance states the total load when
connected, the required voltage and frequency.
EN 41