Chicco DELUXE 254 Bedienungsanleitung Seite 16

when the batteries start charging.
WARNING: in the event of the deactivation or
adjustment of the parent unit volume, the aforemen-
tioned acoustic alarm will also be deactivated or ad-
justed.
- Charging rechargeable batteries.
For quicker results, charge the batteries by connect-
ing the off parent unit (shift the control (2) down and
check that the indicator light 3.1 switches on). By
connecting the mains adapter (1) to the power and
recharging connector of the parent unit (5), the indi-
cator light (3.1) turns green and will switch off when
recharging is completed (at least 8 hours).
The parent unit can still be used while the batteries
are charging, but it will take longer for them to fully
charge. The battery icon (1) will appear on the display
(7) with the internal power levels coming on in suc-
cession. Leave the batteries to charge until the steady
icon (1) appears on the display (7).
- Managing the internal menu
By pressing the central menu adjustment button (9)
you can access the main menu (11), access the second-
ary menus (12-15) and confirm the functions/settings
you have chosen.
The side menu adjustment buttons (9) allow you to
browse the main menu and the secondary menus in
order to select the available functions.
The following functions can be selected from the
main menu:
Remote switching on/off of the luminous halo
(5) on the baby unit from the corresponding menu
(12).
By switching it to ON, the luminous halo (5) on the
baby unit will turn on in accordance with the intensi-
ty of the sounds detected by the baby unit. If active,
the halo will light up to the rhythm of the lullabies
creating a "magic light effect".
Having set this function you are automatically taken
back to the main menu (11).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Remote switching on/off of the night light (12)
on the baby unit from the corresponding menu (13).
Having set this function you are automatically taken
back to the main menu (11).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Remote adjustment of the exposure of the
camera (8) on the baby unit from the corresponding
menu (14).
5 levels of light are available.
Having set this function you are automatically taken
back to the main menu (11).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Switching on/off of the cycle of lullabies on the
baby unit from the corresponding menu (15).
You cannot use the menu (15) to choose which one of
the 6 lullabies you would like to hear.
Having set this function you are automatically taken
back to the main menu. (11)
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Launching the procedure to restore the pairing
between the baby unit and the parent unit.
If the baby unit and the parent unit are consistently
unable to communicate (continuous disconnection
alarm and disconnection screen), even when just a
few centimetres from each other, it is advisable to
initiate the pairing procedure from the main menu
which is performed by the manufacturer by default.
The pairing screen (10) appears when this process is
launched.
Hold the baby unit night light button (12) down for
around 3 seconds. The luminous halo (5) 5.1 indica-
tion will flash green. If the procedure concludes suc-
cessfully, the video screen will appear on the display
in real time; if not, the link setting/loss screen will
appear (9). If necessary repeat procedure.
Leaving the main menu: select this icon to leave
the main menu. If no button is pressed, after about
fifteen seconds you will automatically come out of
the menu.
WARNING!
After switching the parent unit on, always make sure
that the child unit is on.
After switching on the unit always check that it is
possible to receive the signal transmitted at the dis-
tance and/or in the areas you have set up the devic-
es. With the help of a relative it is advisable to carry
out a transmission test from the room in which the
baby unit is located, at the same time moving around
with the parent unit in the chosen areas in order to
check that the signal is being correctly received.
3. FITTING AND REPLACING THE ALKALINE
BATTERIES IN THE BABY UNIT AND THE RE-
CHARGEABLE BATTERIES IN THE PARENT
UNIT.
WARNINGS: These steps must be done only
by an adult.
WARNING: RECOMMENDATIONS FOR ALKA-
LINE BATTERY USE
- Alkaline batteries must be replaced by an adult.
- To ensure that the baby unit functions properly only
use batteries of the same type or equivalent to the
type recommended (alkaline 1.5V AAA/LR3).
- Insert the batteries in the baby unit with the correct
polarity, as indicated in the battery compartment.
16
- D
de
- Al
re
- D
- Al
av
- In
re
- Re
fo
- D
of
- If
m
pa
co
- D
th
- D
- i
- Th
ab
con
CH
- U
20
- Al
fla
fo
ba
da
- D
NB
wit
run
con
run
- D
te
- Th
ba
con
- N
un
th
- If
te
ta
pa
W
m
ba
- In