Accessing Radio Information; Sleep Timer; Alarm Clock - Imperial DABMAN 13 Bedienungsanleitung

6. OPERATION

6.8. Accessing radio information

While the radio is on, press the INFO MENU button.
To retrieve further information, press the button again.
This will display information regarding the genre, frequency,
bitrate and station name.
Note: The radio can only display data if the station provides
these.

6.9. Sleep timer

The radio will switch into standby mode after a preset time when
using the sleep timer.
While the radio is on, press the SLEEP button repeatedly until
the desired time until the radio switches off is shown.
The following times can be set:
10 minutes, 30 minutes, 60 minutes, 90 minutes.

6.10. Alarm clock

The device may be used as a radio alarm clock.
You can set up 2 different alarm times.
In addition, you can determine whether the alarm clock will wake
you with a sound, a DAB+ radio station or a UKW (FM) station.
To set an alarm, proceed as follows:
Press and hold the PRESET button (5) for approx. 2 seconds.
Use the Navigation button (9) to switch to the menu
item<Alarm> and confirm with OK (10).
Confirm the <Alarm 1> once more with OK (10).
Use the Navigation buttons (9) (12) to switch the alarm 1 to
ON.
Press OK.
Now set the time of the alarm.
58