Herunterladen Inhalt Inhalt Diese Seite drucken

Warnings And Safety; Burner Identification; Basic Safety Rules - Riello RX 90 S/PV Montage- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7.

WARNINGS AND SAFETY

The dimensions and type of the heat generator's combustion chamber must have specific values to achieve
combustion with the lowest rate of pollutant emissions.
We therefore recommend you consult the Technical Service Department before choosing this type of burner
for work in conjunction with a certain generator. Qualified personnel are people meeting the professional
technical requirements laid down by Italian law n° 46 of 5 March 1990.
The sales organization has a widespread network of agencies and technical support centres whose
personnel regularly attend training and refresher courses at the company Training Centre.
This burner must be used solely for the purpose it was expressly designed for.
The manufacturer is relieved of any contractual or non-contractual liability for injury to people or animals or
for damage to property caused by incorrect installation, adjustment, maintenance or improper use.
7.1

BURNER IDENTIFICATION

The product Identification Plate gives the serial number, model and main technical and performance data.
If the Identification Plate is tampered with, removed or missing, the product cannot be identified definitely,
thus making any installation or maintenance work difficult and/or dangerous.
7.2

BASIC SAFETY RULES

®
The unit must not be used by children or inexpert persons.
®
Under no circumstances must the intake or exhaust grilles and vents in the room where the unit is installed
be covered up with cloths, paper or any other material.
®
Unauthorized persons must not attempt to repair the unit.
®
Pulling or twisting electric cables is dangerous.
®
No cleaning must be performed unless the unit is disconnected from the power mains.
®
Do not clean the burner or its parts with highly flammable substances (e.g. petrol, alcohol, etc.). The
casing must be cleaned using just soapy water.
®
Do not place anything on the burner.
®
Do not block or reduce the size of vents in the room where the generator is installed.
®
Do not leave flammable substances and containers in the room where the unit is installed.
3342
16 GB

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis