HAPRO Seecret C700 Anleitung Seite 16

Reset hour counter for the lamps
+ +
CONTROLE
16
The hour counter for the lamps should be reset after replacing the lamps.
5 sec.
Keep the <7>, <9> and the <14> buttons pressed simultaneously for 5 seconds.
Reading the lamp hour counter
The hour counter is read by simultaneously pressing the <7> and the <5> buttons for 3 seconds and keeping them
pressed.
The code "HL" will appear at the top of the display and the number "0" will scroll at the bottom.
+
3 sec.