Cooling Down - HAPRO Seecret C700 Anleitung

Messages
GENERAL
ERROR
Attention:
If one of the error messages appears on the display, you should stop using the appliance, unplug the appliance and contact
your dealer.
14
"Not present"
If an option is not available on the appliance, the message "NOT PRESENT" will scroll across the bottom of the display.
This means that the function in question is not available to use.

Cooling down

When the appliance is switched off, a mandatory cooling off period will start automatically.
An hourglass will appear at the top of the display and a number will appear at the bottom (indicating the remaining
cooling off time in seconds).
Appliance = 180 sec.
If an error occurs, "ERROR" will scroll across the top of the display, and a code will appear at the bottom.
E1 = Internal timer has a defect
E2 = Fan in bottom tray has a defect
E3 = Communication error between relay and switch part
E5 = Heating or blower defect
E6 = Unknown phase
E9 = Maximum bench temperature exceeded
E10 = Maximum canopy temperature exceeded
E11 = Communication error ventilation controller bench
E12 = Communication error ventilation controller canopy