Control Functions; Stand-Alone Mode; Pause Mode - HAPRO Seecret C700 Anleitung

Control functions

Coin-op mode + remote start
Press <2> 1x to start the appliance.
Stand alone mode
Press <2> 1x.
The display shows the text "PRESS FEMALE OR MALE BUTTON". Use the <8> and <9> keys to change the gender.
Use the <14> and <15> keys to change the tanning time.
Press <2> 1x to confirm the chosen gender. The appliance will switch on and the session time will start.

Pause mode

Press <3> 1x during a tanning session to put the appliance into pause mode. The lamps will switch off. The body
cooling will continue operating (maximum 4 minutes). Xsens (optional) will pause.
The display will continue to show the session time left and the message "PRESS START TO RESUME" will scroll across
the bottom.
While in pause mode press <2> 1x to switch the appliance on again or press <3> 1x to switch the appliance off. This
will stop the session and the appliance wil start the mandatory 3-minute cooling off period.
Note:
Session time will continue to elapse when the appliance is in pause mode.
10