HAPRO Seecret C700 Anleitung Seite 11

Note:
If you do not press any key for 3 seconds, you will exit the function mode automatically. The (remaining) session time will
appear in the display.
Body Cooling
The <12> button is used to decrease the body cooling.
The <13> button is used to increase the body cooling.
The level of intensity will appear at the top of the display, and "BODY COOLER" will scroll across the bottom.
The body cooling can be set to 4 different levels.
Setting 0: Body cooling is off
Setting 1: Body cooling on minimum setting
Setting 2:
Setting 3: Body cooling on maximum setting
Face cooling
The <14> button decreases the face cooling.
The <15> button increases the face cooling.
The level of intensity will appear at the top of the display, and "FACE COOLING" will scroll across the bottom.
The face cooling can be set to 4 different levels.
Setting 0: Face cooling is off
Setting 1: Face cooling on minimum setting
Setting 2:
Setting 3: Face cooling on maximum setting
Vit D +
Press <11> 1x to switch the function on or off.
The level will appear/scroll at the top of the display, and "VITAMINE-D
Setting "ON" = Vitamine D + is on
+
Setting "OFF"= Vitamine D is off
When the session starts Vitamine D +
After 10 minutes the Vitamine D + lamps will switch off.
The function can not be switched on again. "NOT AVALABLE" will scroll across the bottom.
+ " will scroll across the bottom.
will be active.
11