Before Use; Lubrication; Refilling Oil - Parkside PDSS 16 A1 Originalbetriebsanleitung

Before use

NOTE
► The compressed air tool may only be operated using cleaned,
oil-atomised compressed air and the maximum operating
pressure of 6 .3 bar must not be exceeded on the appliance .
The compressor must be fitted with a pressure reducer to
regulate the working pressure .

Lubrication

NOTE
► Regular lubrication is particularly important to avoid friction
and corrosion damage . We recommend using a suitable special
oil for compressed air tools (e .g . Liqui Moly compressor oil) .
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally
lubricates the appliance as a preparation stage after the
pressure reducer . A mist oiler gives off fine drops of oil into
the air flow and thus guarantees regular lubrication .
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions . Add 3–5 drops of
pneumatic oil into the connector nipple

Refilling oil

To ensure that the tool remains operational for a long time, the tool
must have a sufficient fill of pneumatic oil .
■ 68 │ GB │ MT
.
PDSS 16 A1