3M MT73H7*4*10WS6 series Handbuch Seite 16

EN
1:10 Reconnecting Bluetooth
When the headset is powered on, it tries to reconnect to all
paired device(s) during 5 minutes. A voice message will confirm
the connection, "connected".
NOTE: If the link is lost, a voice message will confirm with
"Disconnected".
SMART TIP: If a Bluetooth
®
and the headset is on, press the Bluetooth
to all paired device(s) in the Bluetooth
will confirm the connection, "connected".
1:11 Bluetooth function
®
Bluetooth is the name of a technical standard for short-
®
range wireless transmission, with a working range of
approximately 10 meters. This headset can be used with
other Bluetooth -enabled units that support any of the
®
profiles: headset (HSP), hands-free (HFP), or streaming
audio (A2DP).
• If the message "no paired devices" is heard, no Bluetooth
device is linked to the headset.
• If the message "connecting Bluetooth
heard, a Bluetooth -enabled device is linked to the
®
headset and connected.
• If the message "connecting Bluetooth
is heard, a Bluetooth device is linked to the headset, but
®
not connected.
1:12 Answer a phone call
When the headset is connected to a phone via Bluetooth
wireless technology and there is an incoming call, answer
by short press (~0.5 seconds) the Bluetooth
1:13 Reject a call
Press and hold (~2 seconds) the Bluetooth
reject a phone call.
1:14 Toggle between phone and headset
When a call is active, it is possible to transfer the audio to
the phone instead of using the headset. Press (~2 seconds)
the Bluetooth button (fig.4). To return the call to the
®
headset, press (~2 seconds) the Bluetooth
more.
1:15 End a phone call
To end an ongoing phone call, short press (~0.5 seconds)
the Bluetooth button (fig.4).
®
1:16 Voice Dial
To enable voice dial, long press (~2 seconds) the Bluetooth
button (fig.4).
1:17 Answer a phone call from the second paired phone
unit during an ongoing call
When a call is active, it is possible to answer an incoming
call from the second paired phone. Answer by a short press
(~0.5 seconds) on the Bluetooth
5
devices
®
device(s) is paired but not connected
button to reconnect
®
range. A voice message
®
, connected" is
®
, connection failed"
®
button (fig.4).
®
button (fig.4) to
®
button once
®
button (fig.4).
®
1:18 Control Bluetooth
Play/pause streaming
Short press (~0.5 seconds) the Bluetooth
Skip to next track
Short press (2x~0.5 seconds) the Bluetooth
twice (fig.4).
Skip to previous track
Rapidly triple press (3x~0.5 seconds) the Bluetooth
(fig.4).
DID YOU KNOW: Audio playback will be automatically paused
from the audio playback unit when you have a call in progress or
two-way radio message. After ending the call / message, the
audio playback will automatically start again.
1:19 Transmitting and receiving messages on a Bluetooth
connected two-way radio
Press the Bluetooth
®
to receive message.
®
1:20 Adjust Bluetooth
Short press (~0.5 seconds) the [+] or [–] button to adjust the
volume on an active paired Bluetooth
2. CONFIGURING YOUR HEADSET
2:1 Main menu (fig.8)
To enter the menu, make a short press (~0.5 seconds) on the
®
on/off/mode button. Use the on/off/mode button to navigate
through the menu and the [+] and [–] buttons to adjust the
settings.
After 7 seconds of inactivity, the headset will exit the menu.
These are the options available in the menu:
2:2 Channel
Lists all the programmed channels for Europe/ANZ in the
headset, up to:
16 for PMR
69 for LPD
Default: 1
2:3 Radio volume
Adjusts the volume level of the incoming radio sound.
(OFF, 1–6) Default: 3
2:4 Ambient listening volume (level-dependent microphones)
®
Helps protect your hearing from potentially harmful noise levels.
Constant rumbling and other potentially harmful noises are
reduced, but you can still speak normally and make yourself
heard. The ambient listening volume adjusts the level-
dependent function for ambient sound. (OFF, 1–6) Default: 3
streaming audio (A2DP)
®
button (fig.4).
®
button rapidly
®
button (fig.4) to transmit and release
volume (fig.3)
®
device.
®
button
®
®