Disassembly; Disassembly Of The Silencer - Elmo Rietschle 2Bh20360-3 Instandsetzungsanleitung

Disassembly

8
8.1

Disassembly of the silencer

▪ Remove the hexagon cap nuts (476) with threaded rods (444).
▪ Remove the silencer kit (990).
▪ Remove the flange (446).
▪ Removing the protective grid (445) and clean if necessary.
▪ Remove the dowel pin (443) from the silencer housing (403) or flange (446).
▪ Remove the silencer insert (413) from the silencer housing (403).
▪ Loosen the screws (051/053).
▪ Remove the manifold (048) and stepped pipe (049).
27 / 67
© Gardner Denver Deutschland GmbH 09.2013 · 610.44495.40.330
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch Tel. 071 918 60 60, Mail: v-g@prematic.ch