Preparing For Maintenance - Elmo Rietschle 2Bh20360-3 Instandsetzungsanleitung

© Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
7

Preparing for maintenance

Burns, chemical burns or poisoning!
Burns, chemical burns or poisoning due to contact with harmful substances
remaining in the G-BH2.
 Any G-BH2 exposed to harmful substances must be decontaminated before
repair.
Before carrying out repairs on the G-BH2:
▪ It must be permanently isolated from the power supply
(including all components connected to the electricity supply, e.g. frequency
inverter, auxiliary ventilator, external earthing, sensors).
▪ All media residues must be removed.
▪ The terminals and the foot mounts must be disconnected.
▪ It must be removed from the system/from the installation location.
▪ The mounted accessories must be removed as per the respective assembly
instructions.
Preparing for maintenance
WARNING
25 / 67
Tel. 071 918 60 60, Mail: v-g@prematic.ch
7
09.2013 · 610.44495.40.330