Fitting The Compressor Foot - Elmo Rietschle 2Bh20360-3 Instandsetzungsanleitung

9 Mounting
610.44495.40.330 · 09.2013
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
9.4

Fitting the compressor foot

▪ Position the compressor foot (062).
▪ Put the washers (064) onto the screws (063).
▪ Put medium strength threadlocker onto the thread of the screw (063).
▪ Premount the compressor foot (062) on the motor housing (001) using the
screws (063), washers (064) and nuts (065).
▪ Put the washers (067) onto the screws (066).
▪ Put medium strength threadlocker onto the thread of the screw (066).
▪ Premount the compressor foot (062) on the compressor housing (002) using
the screws (066).
▪ Tightly screw the compressor foot (062) using screws (063) and screws (066).
42 / 67
Tel. 071 918 60 60, Mail: v-g@prematic.ch
© Gardner Denver Deutschland GmbH