Fit The Ventilator - Elmo Rietschle 2Bh20360-3 Instandsetzungsanleitung

© Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
9.11

Fit the ventilator

If the G-BH2 is provided with an auxiliary ventilator (B), then continue as-
sembling as per Assembling the auxiliary ventilator [➙ 60].
▪ Insert the feather key (505) if provided.
▪ Push the exterior fan (501) onto the rotor (005) as far as it will go.
▪ Mount the circlip of the auxiliary ventilator (506) if provided using circlip pliers.
▪ Position the fan guard (500) on the motor housing (001), over the external fan.
▪ Secure the fan guard (500) to the motor housing (001) using the screws (503).
51 / 67
Tel. 071 918 60 60, Mail: v-g@prematic.ch
Mounting 9
09.2013 · 610.44495.40.330