AWR300 Quick Start Guide
4.1.2.2 WLAN status
Status
WLAN is switched on but not connected to an Access Point.
Connected to an Access Point and waiting for connection (listening).
Connection is established (TCP or UDP – port is open)
WLAN error: Communication to WLAN module failed or booting in progress.
4.1.2.3 Bluetooth status
Status
Slave Mode – AWR300 can be connected from other devices
Master Mode – AWR300 is trying to connect to remote device.
Connected (in either Bluetooth Mode)
Bluetooth error: Communication to Bluetooth module failed or booting in progress.
4.1.2.4 USB status
When the AWR300 is connected to the USB
port of a computer, the USB symbol is shown:
4.1.2.5 RS232 status
If the AWR300 is connected to an RS232
interface, the following symbol appears:
12/09/16
Meaning
Meaning
Page 7 of 9