Agrident AWR300 Bedienungsanleitung Seite 50

AWR300 User Manual
The AWR300 itself does not need a passkey. However, if other Bluetooth devices are using a
higher security level and they require one, the passkeys on both devices have to match, otherwise
the connection cannot be established.
The menu item 'Bluetooth Info' shows some Bluetooth hardware and firmware related information,
the configured Bluetooth Mode & Profile and the connection status. Details concerning the color
of the Bluetooth symbol depending on the connection status are explained in chapter 4.1.2.3.
09/03/18
Choose the desired Profile using the
and confirm with .
Use the / keys in order to change the character and
the / keys to move to the previous / next digit. When
browsing through the list of characters, you can hold down
the or key in order to increase the scrolling speed.
The key deletes the last digit. If you hold it for at least
one second, all digits will be erased.
Press the key in order to set the passkey.
BD Address: Bluetooth Device Address of the AWR300s
Bluetooth module, unique worldwide
Module: Bluetooth model, built into the reader; here:
'BT43'
Build Version: AWR300s Bluetooth module Firmware
version
Mode: Bluetooth Mode plus Bluetooth Profile in brackets
Status: Connection Status, here: tries to connect to remote
device
In this case the AWR300 is connected to the remote
device. When the connection would drop, the reader would
try to reconnect to the configured Bluetooth partner until
successful. This is done automatically.
Here the AWR300 is configured to be the Bluetooth Slave.
It is discoverable by other device and it is connectable. The
reader will not try to connect to a remote device in this
configuration but it will just wait for incoming connections.
/ / / keys
Page 40 of 49