Print; Print Last Group - Agrident AWR300 Bedienungsanleitung

AWR300 User Manual
Non-editable fields are only shown but can neither be selected nor modified. In
this case the Database 'creator' did not want to allow editing this information.
The difference to scanning for tags from the home screen is that no record will be
created here – this is really just a 'Database lookup'.

Print

7.5
The AWR300 allows to send the collected records to a mobile Bluetooth printer. There are
different options available for the printing procedure, like only printing the last group, printing a
particular group or printing all groups. It is also possible to change basic printer settings here.
Please ensure that your printer is set up correctly before you try printing records.
The AWR300 stores the printers Bluetooth address as a secondary address only. When no print
jobs should be done, the AWR300 would always try to connect to its primary Bluetooth partner,
like a computer, smartphone, PDA or weighing indicator in Master Mode. When one of the printing
actions is started, the reader drops the connection to the primary device and tries to connect to
the configured Bluetooth printer.
After the 'Print' menu was left, the connection to the printer will be dropped and the AWR300 tries
to re-connect to the configured primary Bluetooth partner again (if in Master Mode). The huge
advantage is that the user does not need to select a different Bluetooth device just for printing.

7.5.1 Print Last Group

Once selected, the AWR300 tries to connect to the configured printer. If connected, this
connection remains active until the 'Print' menu was left.
09/03/18
As soon as a tag has been read AND there is a match in
the Database, the entry will be shown.
You may move to the previous / next (editable) field by
using the / keys and switch between the different
pages via or .
The key allows to modify data, if the field is configured
to be editable.
The reader is trying to connect to the Bluetooth printer.
When the connection was established, printing will be
started immediately.
If lots of data have to be printed, a progress bar is visible.
When only a few datasets are sent to the printer, you might
not see it at all.
The AWR300 returns to the printer menu afterwards.
Page 28 of 49