Agrident AWR300 Bedienungsanleitung Seite 53

AWR300 User Manual
The menu item 'Show WLAN Info' displays hardware and firmware information of the WLAN
module, a summary of the currently configured basic settings and the connection status.
Information about the color of the WLAN symbol depending on the connection status are
explained in chapter 4.1.2.2.
09/03/18
The MAC Address is a unique 12-digit number which
clearly identifies each network adapter worldwide. The
SSID can be understood as the network name. Device and
Host do not show anything yet because there is no
connection. The Status 'connecting AP' means that the
AWR300 is trying to connect to the configured Access Point
but this was not successful yet. By pressing
switches to the next screen.
In the first line, the WLAN module type is shown. The older
version is 'WF43' and the newer one 'WF63'.
The Build Version shows the firmware version of the
WLAN module.
The configured WLAN Mode is 'Station' which means that
the AWR300 will try to join the configured Access Point.
The WLAN Protocol is 'TCP Server', so the Host is the
TCP Client and has to open the correct port for the correct
IP address.
Now the AWR300 has joined the configured Access Point
(WLAN symbol turned into blue) and the Status has
changed to 'waiting for connect'.
Device shows the IP address (192.168.1.3) of the AWR300
plus the configured port (2010).
Now the host can open a connection by using this IP
address and this port.
Here the host has opened the connection (WLAN symbol
turned into green) and the devices can communicate.
The Host has the IP address '192.168.1.2' and it has
connected to the AWR300 using IP address '192.168.1.3'
and port '2010'.
, the display
Page 43 of 49