Agrident AWR300 Bedienungsanleitung Seite 32

AWR300 User Manual
The sequence of a Task depends on the Task-Definition. In case there are 'logical'
problems with the sequence or the collected data, please contact your local
distributor. Agrident is not responsible for such definitions.
09/03/18
That is a Date-Field. The device suggests the current date
but the user has the chance to edit it.
... Increase number
... Decrease number
... Next field
... Previous field
... Confirm input
When this field is shown, the AWR300 will start scanning
for a transponder after
After a tag has been read successfully, the display will
show the EID and ask for a confirmation. By pressing 'OK'
(left soft key) the EID will be stored and the Task is
continued. If the EID was the wrong one it can be deleted
by pressing the right soft key ('DELETE') and the reading
process can be started again.
This example shows a 'Speed-Loop'. In this case there is
nothing to enter but the RFID reader is activated an tags
are read continuously until the right soft key ('Cancel') is
pressed twice...
...then the device will ask for another confirmation. If the
left soft key (here: 'YES') is pressed, the records made until
now will be saved and the 'Control' is finished. By pressing
the right soft key ('Cancel') the AWR300 will return to the
reading loop and more transponders can be read.
has been pressed.
Page 22 of 49