Setup Printer - Agrident AWR300 Bedienungsanleitung

AWR300 User Manual
The AWR300 always includes a Bluetooth module and if the scale has Bluetooth built in as well,
it makes no sense to use RS232, a cable connection. Scales without integrated Bluetooth might
be upgraded by using an external adapter. Please contact your local distributor for further details.
However, RS232 is also supported by the AWR300 but in this case you require the optional
RS232 cable 'APC310' (p/n 4061). An adapter might be necessary additionally, depending on
your weighing indicator.
If the baud rate of the scale differs from the configured scale baud rate on the AWR300, this might
cause communication issues in case of using Bluetooth as the scale interface. In case of an
RS232 connection, the communication will not work at all, if the baud rates do not match. So they
always should be configured to the same values on both devices.

7.6.3.3 Setup Printer

09/03/18
Choose the correct type depending on the model you have.
... Select the scale type
/ / /
... Apply the setting
Select the interface using the
confirm with .
Select the correct baud rate using the
confirm with .
Baud rates from 300bps to 115200bps are possible in
particular steps.
The printer setup is the same as described in chapter 7.5.5,
here is just another menu entry for configuring the same
settings.
/ / / keys and
/ keys and
Page 37 of 49