AWR300 User Manual
7.6.2.4 Set Language
7.6.3 Interface Setup
7.6.3.1 Set RS232 Baudrate
7.6.3.2 Setup Scale
The AWR300 is able to receive the weight from indicators which can send it either via Bluetooth,
or via RS232. There are different scale types supported, also from the major brands on the
market. This function can only be used for Task-Mode and Database Function, where the so
called 'Weight-from-Scale' fields are available.
09/03/18
The default display language is always English. It is
possible to upload up to 9 custom languages. Please
contact your local distributor for further details.
... Select the desired language
/
... Set the selected language
The Interface Setup contains settings for configuring the
AWR300s several interfaces like RS232, Bluetooth or
WLAN (optional). If your device does not incorporate the
Wi-Fi option, the item 'WLAN' is not shown.
In order to allow devices the communication via RS232, the
connection speed ( baud rate ) needs to be the same on
both devices – otherwise the communication will not work.
The default value of '9600' is common, but quite slow.
Values of up to '115200' are possible.
... Change the baud rate
/
... Set the new value
The scale type, the interface and the scale baud rate have
to be configured correctly in order to allow this feature to
work.
Page 36 of 49