Agrident AWR300 Bedienungsanleitung Seite 52

AWR300 User Manual
When the AWR300 joined an Access Point or another device has joined the
AWR300 (in case the reader creates the Access Point), this does not mean that
communication is possible already. In addition, a UDP or TCP connection must
be opened, before data can be exchanged!
Depending on the application, a UDP or TCP connection must be established and an appropriate
port must be opened. It is not part of this manual to explain those things – information about such
items can be found in commonly available literature.
In case the Access Point uses WPA2 security, you are prompted to enter the passphrase. In order
to change it, press any of the
can be typed in.
09/03/18
Select the desired WLAN Mode using the
keys and confirm with
Choose the correct WLAN Protocol (depending on your
application) using the
.
The menu item 'Show Access Points' is only visible if
WLAN is enabled and set to Station Mode. It is listing the
currently available Access Points plus a signal strength
indication. You may also connect to an Access Point from
here by pressing
/ / / keys. A virtual keyboard opens where the passphrase
.
/ / / keys and confirm with
.
/ / /
Page 42 of 49