Reader Hardware; Parts Of The Awr300; Accessories - Agrident AWR300 Bedienungsanleitung

AWR300 User Manual
3

Reader Hardware

This chapter describes the AWR300 hardware including all accessories.

Parts of the AWR300

3.1
The AWR300 stick reader is 65 centimeters long and has a weight of only 750 grams including
the battery. It provides an excellent reading performance, a large 2.4 inch color TFT display, a
multicolor LED indicator at the tip, two status LEDs above the display, a speaker and a vibrating
handle. The Reader can be controlled with seven ergonomic keys below the display.
IP67 connector with
bayonet socket (self-
closing)
7 keys for easily
controlling the Reader
The AWR300 is using a 7.4V Lithium-Ion battery with a capacity of 2.600mAh, which is located in
the handle. This battery could be replaced but normally it is not necessary because of the very
long operating time.

Accessories

3.2
The AWR300 comes with some standard accessories that are shown below.
ARB300 – Battery Pack
The USB plug of the Y-Cable can be connected to any USB-port of a computer. Please note that
it is necessary to install the appropriate USB driver first. The power adapter has interchangeable
plugs for most power outlets used all over the world. The provided screw driver shall be used in
order to remove and fix the screws for the battery cover.
09/03/18
Large 320x240 dots
color TFT display
Y-Cable (USB / Charge)
Multicolor
status LED
Blue status LED
Power adapter
Multicolor LEDs
for indicating the
reading status
Screwdriver
Page 6 of 49