Clear Data; Clear Groups; Clear Task Data - Agrident AWR300 Bedienungsanleitung

AWR300 User Manual

7.4.2 Clear data

It is possible to delete collected data on the AWR300. There are different options for erasing data,
also depending on the way they have been collected in. As already explained earlier in this
manual, the standard records are saved in groups. These are the records which have been saved
upon transponder reading started from the home screen. If Task-Mode is used on the device, it
is also possible to delete collected Task-Data from the 'Clear-Data' menu – if not, this menu is
hidden.
Please note that deleted data are lost irreversibly. It is not possible to undo this
action at all. I case of doubt, you should backup the data first.

7.4.2.1 Clear Groups

7.4.2.2 Clear Task Data

09/03/18
After selecting 'Clear Data', two submenus are shown.
Clear Groups: refers to records made in groups
Clear Task Data: only applies for data collected in Task-
Mode
Clear Last Groups: Erases the last group completely
Select Group: opens the list of groups in order to select a
particular group to delete
Clear All Groups: Erases ALL groups from the device
memory (no Task-Data and no Database)
Select Task: only the data of one particular Task will be
erased
Clear All Task Data: erases the Task data of ALL Tasks
which are present on the device
Page 25 of 49