Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information; System Pressure - Nibe HPAC S40 Installateurhandbuch

Klimamodul
Vorschau ausblenden Andere Handbücher für HPAC S40:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

English
Important information

SAFETY INFORMATION

This manual describes installation and service proced-
ures for implementation by specialists.
The manual must be left with the customer.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given super-
vision or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Rights to make any design or technical
modifications are reserved.
©NIBE 2019.
System pres-
sure
Max. system
pressure, heat-
ing medium
Max flow
Max. permitted
ambient temper-
ature
HPAC S40 must be installed via an isolator
switch. The cable area has to be dimensioned
based on the fuse rating used.
HPAC S40 | GB
MPa
Defined by
main
product
l/s
Defined by
main
product
°C
35
If the supply cable is damaged, only NIBE,
its service representative or similar author-
ised person may replace it to prevent any
danger and damage.
SYMBOLS
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should consider when installing
or servicing the installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
MARKING
CE
The CE mark is obligatory for most products sold
in the EU, regardless of where they are made.
IP 21
Classification of enclosure of electro-technical
equipment.
Danger to person or machine.
!
Read the Installer Manual.
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis