Driver - WIKA mensor CPC2000 Betriebsanleitung

7. Interface
Command
Menu settings
GB
:smm <a | c | m >
:ssw <1 ... 100>
:swm <a | c | m | z l v | s> Defne the operating modes of the instrument
:szc <0,1>
:szi <1 ... 60>

7.5 Driver

The current USB interface driver is "Future Technology Devices International Limited"
(FTDI) provided for download on its website for all major operating systems (Windows,
Linux, Mac OS).
Homepage: http://www.ftdichip.com
■
Download: http://www.ftdichip.com/Drivers/VCP.htm (FTDI Homepage --> Drivers -->
■
VCPDrivers)
Installation instructions for the various operating systems:
■
http://www.ftdichip.com/Documents/InstallGuides.htm (FTDI Homepage -->
Documents --> Installation Guides)
28
Answer function
Defne the operating modes of the instrument
a --> start automatic mode
c --> start control mode
m --> start measure mode
Step size
1 ... 100 --> step size from operating the up and down buttons in %
a --> start automatic mode
c --> start control mode
m --> start measure mode
(only available in CONTROL and MEASURE modes)
z --> ZERO
(only available in CONTROL mode)
l --> LEAK test
l --> back to CTRL mode (like LEAK button)
v --> VENT (vent the entire system)
(only available in AUTOMATIC mode)
Zeroing before entry into control mode
0 --> of
1 --> on
Zeroing interval
1 ... 60 --> time in minutes
WIKA operating instructions, model CPC2000