Video Settings; Speaker Setup; Language Settings - Clatronic AR 829 DVD Bedienungsanleitung

Rating (Child protection)
Some DVD contain information concerning the target group.
This method is comparable with the rating of cinema films
("Suitable only for persons of 12 years and over" e.g.).
If you have the child protection option activated a probably
existing corresponding information is read from the DVD and
compared with the value pre-set by you. If a DVD is intended
for an older age group than the one pre-set by you, the DVD
cannot be played. You can select the following options for child
protection after unlocking the password protection:
• Kid Safe: Suitable for children.
• G: Suitable for all age groups.
• PG: The presence of parents is recommended. Some sce-
nes may be unsuitable for children.
• PG 13: The presence of parents is strictly recommended.
Some scenes may be unsuitable for children under the age
of 13.
• PGR: The presence of parents is strictly necessary.
• R: Young persons under the age of 17 may only view this
film in the presence of an adult.
• NC17: Children and juveniles under the age of 17 are not
allowed to watch this film.
• Adult: The film must only be watched by adults.
Factory setting
Select the command "Default/Restore" if you want to reset the
player to the factory implemented default settings.
Any settings you have made will be lost.

Language Settings

You can make various language settings here:
• OSD language: Here you can select the language of the on-
screen displays.
• Audio language: Here you can select the preferred langua-
ge for the audio output.
• Subtitle language: Here you can select the preferred langu-
age for the subtitles accompanying the film.
• Menu language: Here you can select the preferred langua-
ge for the DVD menus.

Video Settings

You can make various settings to adjust the video signal.
• Brightness
• Contrast
• Hue (NTSC only)
• Saturation
• Sharpness

Speaker setup

Downmix
Change the characteristics of the speaker output:
• LT/RT: Choose this setting if you want to play the DVD with
the Pro Logic Dolby stereo effect. This produces a almost
real 2-channel replay effect.
• Stereo: Choose this setting if you want to play a DVD,that
has been produced in the 5.1-Audio format, as 2-channel
stereo sound.
• VSS: Use this setting to simulate a 5.1 playback.
Digital setup
Dynamic Range
31