Settings - Clatronic AR 815 USB Bedienungsanleitung, Garantie

Volume
WARNING
Hearing damage due to high volume!
High volumes can permanently damage your hearing.
►
Set a moderate volu
‹
Turn the multi control knob (3) to set the volume.
Sound Settings
‹
Press the multi control knob (3). The current volume is dis-
played. Press again to cycle through the next setting options.
The following settings are possible:
VOL - volume (0 to 100)
BAS - bass (-10 to +10)
TRB - treble (-10 to +10)
BAL - Balance (sound distribution between left and right speak-
ers) (10L to 10R)
FAD - Fader (sound distribution between rear and front speak-
ers) (10F to 10R)
‹
Turn the multi control knob to change the displayed setting.
Further Settings with the Multi Control Knob
‹
Press and hold the multi control knob (3) to access further
setting options. Each further pressing of the multi-controller
switches to the next set point.
‹
Turn the multi control knob to change the displayed setting.
The following settings are possible:
BEEP
AREA
72
Downloaded from www.Manualslib.com

Settings

me.
key tone:
■
BEEP 2ND : The unit sounds a beep tone when
you press and hold a multifunctional button.
■
BEEP ALL : The unit sounds a beep tone every
time you press a button.
■
BEEP OFF : The unit sounds no beep tone.
Region, when the unit is used, Europe (EUR) or USA.
NOTE
►
Changing this setting deletes all station
presets.
manuals search engine
TA Traffic announcements
■
TA SEEK
: With activated TA function the unit
searches for a station with traffic announce-
ments.
■
TA ALARM : No automatic station search. The
unit sounds a beep tone if no traffic information
is received and NO TP/TA is displayed. SEEK
PI is displayed if the selected station does not
transmit an RDS signal.
PI Moving into an area where two stations with identical
AF, but different Pl code (PI = program information)
are received destabilizes reception. In this situation
you have two options:
■
PI SOUND : To change stations the other station
is played for less than one second.
■
PI MUTE
: The other station is muted.
RETUNE Delay for automatic search with traffic announcements
and/or program information:
■
S
(short) after approx. 30 seconds
■
L
(long) after approx. 90 seconds
MASK Setting to mask station during search:
■
DPI
: Alternative frequencies with different Pl
code are excluded from the search.
■
ALL
: Alternative frequencies with different Pl
code and no RDS information with high signal
level are excluded from the search.
Loudness Function
‹
BND/LOU/ENT (7) to activate the Loudness
Press and hold
function. LOUD ON is displayed. The Loudness function
enhances the bass frequencies.
‹
Press and hold BND/LOU/ENT (7) again to deactivate the
Loudness function. LOUD OFF is displayed.
Sound Settings
‹
EQ (12) to cycle through the settings FLAT,
Repeatedly press
CLASSIC, POP, ROCK or EQ OFF. The selected setting is
displayed.
Display Information
‹
Repeatedly press DSP (10) to cycle through the following
display information:
Radio station, time (set automatically in case of RDS recep-
tion), frequency of the actually set radio station, information
concerning the file name (only with playback of an MP3 file
or a WMA file).