Installation; Conditions For Use - EKOM DK50-10 Serie Benutzerhandbuch

DK50-10

INSTALLATION

10. CONDITIONS FOR USE

 Compressors may only be installed and operating in dry, well-ventilated and clean environments with
environmental parameters that meet the requirements specified in Chapter 5, Technical data. The
compressor must be installed so that it is accessible at all times for operating and maintenance. Please
ensure that the nameplate on the device is readily accessible.
 The compressor must stand on a flat, sufficiently stable base (be aware of the weight of the compressor,
see Chapter 5, Technical data).
 Compressors may not be operated outdoors or in otherwise wet or damp environments. Do not use the
compressor in the presence of explosive gases, dust or flammable liquids.
 Before connecting the compressor to medical equipment, the supplier must confirm that it meets all
requirements for its use. Refer to the technical data of the product for this purpose. When a unit is to be
built-in, classification and evaluation of compatibility must be done by the manufacturer or supplier of the
product to be used.
 Any use other than that described in this manual is not covered by the guarantee, and the manufacturer is
not liable for any damages that may result. The operator/user assumes all risk.
Only a qualified professional may install the compressor and place it into operation for
the first time. This professional is obliged to train operating staff as to the use and
maintenance of the equipment. Installation and training of all operators shall be confirmed
by the installer's signature on the certificate of installation.
Prior to installation, ensure that the compressor is free of all transport packaging and
stabilizers to avoid any risk of damage to the product.
Caution! When in operation, the compressor is hot. Burns or fire may result if contact is

made by the operator or any flammable material.
Ambient operating conditions
Temperature:
Max. relative humidity:
Max. absolute humidity:
08/2017
+5°C to +40°C,
70%,
3
15 g/m .
- 17 - NP-DK50-1_08-2017-MD