Important Information; Ce Marking; Warnings; General Safety Warnings - EKOM DK50-10 Serie Benutzerhandbuch

DK50-10

IMPORTANT INFORMATION

1. CE MARKING

Products labeled with the CE mark of compliance meet the safety guidelines (93/42/EEC) of the European
Union.

2. WARNINGS

The product is designed and manufactured to be safe for the user and its surrounding environment when
used in the defined manner. Keep the following warnings in mind. This keeps risks to a minimum.
2.1. General warnings
 The user manual aids in correct installation, operation and maintenance of the product. It is included with
the product and must be kept close to it at all times. Careful review of this manual will provide the
information necessary for correct operation of the product.

Original packaging should be kept for the return of the equipment. Only the original packaging ensures
protection of the equipment during transport. If it is necessary to return the product during the warranty
period, the manufacturer is not liable for damages caused by improper packaging.
 This warranty does not cover damages originating from the use of accessories or consumables other
than those specified or suggested by the manufacturer.
 The manufacturer only guarantees the safety, reliability and function of the equipment if:
- installation, new settings, changes, expansion and repairs are performed by the manufacturer or a
service provider authorized by the manufacturer.
- the product is used pursuant to the user manual.
 The user manual corresponds to the configuration of the product and its compliance with applicable
safety and technical standards at the time of its printing. The manufacturer reserves all rights for the
protection of its configuration, methods and names.
 Translation of the user manual is performed in accordance with the best available knowledge. The
Slovak version is to be used in the event of any uncertainties.
2.2.

General safety warnings

The manufacturer designed and manufactured the product to mitigate all risks when used correctly. Please
note the following safety measures to mitigate residual risks.

Use and operation of the product must comply with all local codes and regulations. The operator and
user are responsible for following all appropriate regulations in the interests of performing work safely.

Only the use of original parts guarantees the safety of operating personnel and flawless operation of the
product itself. Only accessories and parts mentioned in the technical documentation or expressly
approved by the manufacturer may be used.

The operator must ensure the equipment is functioning correctly and safely before every use.

The user must fully understand the operation of the equipment.

Do not use the product in explosive environments.

The user must inform the supplier immediately if any problem occurs during use of the equipment.
08/2017 - 3 - NP-DK50-1_08-2017-MD