Cleaning And Maintenance; Cleaning The Steam Outlet - Klarstein Espressionata Gusto Handbuch

EN
32

CLEANING AND MAINTENANCE

Cleaning the appliance regularly will ensure a long life and proper functioning of the
appliance.

Cleaning the Steam Outlet

DANGER: Clean the steam outlet after each use to prevent blockages in the
steam pipe, damage to the appliance and injury. The clogged steam pipe
may cause an explosion, damage to the appliance and scalding due to
escaping hot steam.
CAUTION: Do not touch the steam pipe with bare hands during operation.
The steam pipe is hot and will retain heat for a while after use. Grasp the
steam pipe by its lever.
1 Press the button to turn off the appliance.
2 Make sure that the steam knob is at position 0 and the button
accidental scalding.
3 Check if the water tank needs to be filled. The water level must not exceed the MAX
mark. Refill the tank if necessary and place it into the appliance.
4 Put an empty jug under the steam tube to prevent steam from escaping.
5 Press the button to turn on the appliance.
6 Press the button . The appliance will start pumping water from the tank through
the filter.
7 When the water starts flowing out of the outlet, press the button
8 Wait until the indicator WATER lights.
9 Press the button .
10 Wait until the indicator STEAM lights.
1 1 Turn the steam knob on slowly and counter-clockwise to produce steam.
12 After 30 seconds or when the jug is filled with hot water, turn the steam knob back
to position 0.
13 Press the button again to stop.
14 Press the button to turn off the appliance.
15 Leave the appliance to cool off completely.
16 Clean the outside of the steam outlet with a wet, clean sponge and dry it.
If the steam outlet is blocked even after cleaning and is not capable of preparing steam,
contact a service centre authorised by the manufacturer.
is off to prevent
again to stop.