Preparing Espresso - Klarstein Espressionata Gusto Handbuch

5 Place a coffee cup on the drip grid.
6 Make sure that the steam knob is at position 0 and the button
accidental scalding.
7 Press the button to turn on the appliance.
8 Press the button . The appliance will start pumping water from the water tank.
9 When water starts flowing out of the outlet, re-press the button
10 The appliance now begins to heat the water.
1 1 When the indicator WATER lights heating has finished.
12 Press the button again to fill the cup.
13 Re-press the button to turn off the appliance.
14 Pour the water from the cup into the sink.
15 Dry the vessel, drip grid and drip pan.
Now the appliance is ready to prepare Espresso!

Preparing Espresso

CAUTION: Do not leave the appliance unattended during use, as it requires
manual operation.
WARNING: To avoid burns, do not touch the metal parts of the appliance
with bare hands during operation. The metal parts of the appliance are hot
during operation. Always grip the metal parts by the handle, knob or lever.
to turn off the appliance.
1 Press the button
2 Remove the water tank from the appliance.
3 Fill it with water. The water level must not exceed the MAX mark.
4 Carefully reinsert the tank into the appliance.
5 Make sure that the steam knob is at position 0 and the button
accidental scalding.
6 Press the button to turn on the appliance.
7 Press the button . The appliance pumps water from the tank through the filter.
8 As soon as water comes out of the coffee outlet, press the button
9 The appliance will now start to heat the water.
10 The WATER indicator lights up when the water is hot enough to make an espresso.
1 1 Place an empty espresso cup on the drip grid.
12 Press the button again and wait a moment until the espresso is dispensed.
NOTE: While making an espresso or using the frother, the WATER and
STEAM indicators will temporarily turn off to indicate that the appliance is
heating to maintain the temperature.
is off to prevent
to stop.
is off to prevent
again to stop.
EN
29