Cleaning And Maintenance - Klarstein PASSIONATA ROSSA 20 Bedienungsanleitung

EN
24
Automatically shut-off function
The appliance has the function of shut-off power
automatically, when the power cord is plugging into the
power outlet and the ON/OFF button has been pressed,
if without any action within 25 minutes, the appliance will
cut off power automatically and the power indicator will be
extinguished, if you want to continue operating, you shall
press the ON/OFF button twice (for the first pressing, make
it return to higher position which is OFF position, for the
second pressing, press it down to turn on power)the and the
power indicator will be illuminated, the appliance can be
operated.

CLEANING AND MAINTENANCE

1. Cut off power source and let the coffee maker cool down completely before
cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water
tank, drip tray and removable shelf regularly then dry them
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water
for cleaning.
3. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then
you can clean it with cleanser, but at last you must rinse with clear water.
4. Clean all the attachments in the water and dry thoroughly.
Cleaning mineral deposits
1. To make sure your coffee maker operating efficiently, internal piping is cleanly and
the peak flavor of coffee, you should clean away the mineral deposits left every
2-3 months.
2. Fill the tank with water and descaler to the MAX level ( the scale of water and
descaler is 4:1, the detail refers to the instruction of descaler. Please use "household
descaler", you can use the citric acid (obtainable from chemist's or drug stores)
instead of the descaler (the one hundred parts of water and three parts of citric
acid).
3. According to the program of pre-heating, put the metal funnel (no coffee powder in
it) and carafe (jug) in place. Brewing water per " PRE-HEATING".
4. Press down the ON/OFF button to the lower position which is the ON position,
the red indicator will be illuminated, make sure the coffee/steam knob is on the 
position, and waiting for a moment, the coffee maker begins to be heated.
fig.2