Cleaning And Maintenance - Klarstein Aromatica II Bedienungsanleitung

3 Press the release button (12) to open the filter holder assembly (1 1).
4 Place a suitable coffee filter in the coffee filter holder (10).
5 Put the required amount of coffee in the coffee filter.
6 Close the filter holder assembly (1 1) until the release button (12) clicks into place.
7 Place the coffee pot (16) on the heating plate (18).
8 Switch on the appliance by pressing the on/off button (1). The cup-of-coffee
symbol (E) appears. The appliance starts making the coffee.
9 To interrupt the process, press the on/off button (1).
10 If the process is completed, the appliance will beep and switch to keep-warm
mode. The cup-of-coffee symbol (E) starts flashing. The appliance can be switched
off by pressing the on/off button (1) or the appliance switches off automatically
after 40 minutes.
1 1 Allow the appliance to cool down completely.

CLEANING AND MAINTENANCE

• Before cleaning or maintenance, always switch off the appliance, remove the mains
plug from the wall socket and wait until the appliance has cooled down.
• Do not immerse the appliance in water or any other liquids.
• Do not use aggressive or abrasive cleaning agents to clean the appliance.
• Do not use sharp objects to clean the appliance.
• Regularly check the appliance for possible damage.
• Clean the accessories:
- Clean the coffee pot in soapy water.
- Clean the coffee filter holder in soapy water.
- Clean the lid of the coffee bean compartment in soapy water.
- Thoroughly dry the accessories.
• Clean the outside of the appliance with a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
• Put the appliance and the accessories in the original packaging
• Store the appliance in a dry and frost-free place, out of the reach of children.
Cleaning the grinding compartment (fig. C & I)
Note: When grinding coffee beans, coffee powder can clog the grinding
mechanism. The grinding compartment (19) can be cleaned every 2 weeks to prevent
the grinding mechanism from being clogged.
Before cleaning the grinding compartment the following steps are required:
1 Switch off the appliance.
2 Remove the mains plug from the wall socket.
3 Remove the coffee pot from the heating plate.
4 Empty the coffee filter holder. Place a suitable coffee filter. Close the filter holder
assembly.
EN
35