GB
MT
Operation
Fully unwind the suction hose (
21) before commencing work.
Switching on/off
Connect the mains plug.
To vacuum dust, plug the electrical
tool onto the mains socket on the
vacuum (
Only connect electrical appliances with a
maximum power rating of 2200 W.
Switching on the vacuum cleaner
(Permanent operation):
Move the On/Off switch (
position.
Switch on electrical appliance +
vacuum cleaner:
1. Move the On/Off switch
13) to the position
(
2. Switch on electrical appliance.
Switching on the electrical appli-
ance automatically switches on the
vacuum cleaner. Once the electrical
appliance has been switched off,
the vacuum cleaner switches off fol-
lowing a time lapse.
Switching off the vacuum cleaner:
Move the On/Off switch (
"0" position.
Airflow Control
The airflow can be continuously adjusted
by turning the airflow controller (
minimum airflow
MIN:
maximum airflow
MAX:
38
11).
13) to the "I"
13) to the
4).
Work breaks
If you want to store away the assembled
suction equipment when you take a break,
you can
push the telescopic suction tube (19)
together and insert the suction tube
holder (20) into the accessory holder
(3a) on the motor head (3);
the telescopic suction tube (19) can be
placed in the retaining bracket (29).
Dry vacuuming
The appliance is supplied with the
fluted filter (14) fitted.
Vacuuming with a fluted filter:
1. To vacuum dry, fit the fluted filter (14)
onto the filter basket (3b) on the motor
housing (3). Here, the upward curved
sealing lip must point away from the
motor housing.
2. Fit the filter cover (14a) and turn it gen-
tly to lock it:
To lock the filter cover
To unlock the filter cover
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the addition-
al use of a paper filter bag (brown).
1. Fit the fluted filter (14).
2. Fold the side flaps on the paper filter
bag (15) down on the perforation.
3. Unfold the paper filter bag (15) com-
pletely and invert it over the internal suc-
tion fitting of the suction connection (10).