Herunterladen Inhalt Inhalt Diese Seite drucken

General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PBS 900 C3 Originalbetriebsanleitung

Bandschleifer
Vorschau ausblenden Andere Handbücher für PBS 900 C3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
NOTE
The vibration emission value specified in these
instructions has been measured in accordance
with a standardised measuring procedure and
can be used to make equipment comparisons .
The specified vibration emission value can also
be used to make an initial exposure estimate .
WARNING!
The vibration emission value varies in accord-
ance with the use of the power tool and may
be higher than the value specified in these
instructions in some cases . Regular use of the
power tool in such a way may cause the user
to underestimate the vibration . Try to keep the
vibration loads as low as possible . Examples
of measures for reducing the vibration load
are wearing gloves when using the tool and
limiting the working time . Wherein all states
of operation must be included (e .g . times
when the power tool is switched off and times
where the power tool is switched on but run-
ning without load) .
PBS 900 C3
General Power Tool
Safety Warnings
WARNING!
Read all safety warnings and all instruc­
tions. Failure to follow the safety information
and instructions may result in electric shock,
fire and/or serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool .

1 . Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents .
b) Do not operate power tools in explosive atmo­
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes .
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control .

2 . Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock .
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded .
GB │ IE
 13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis