Wet Vacuuming; Blowing; Powertool Vacuuming - Parkside PNTS 1500 B3 Originalbetriebsanleitung

GB
A ne dirt lter bag made of micro
lter eece is also optionally avail-
able, which can be used in place
of the included paper lter bag (see
Replacement parts Accessories ).
Vacuuming with the dry filter
(fabric filter bag, optionally
available):
The anti-tear fabric lter bag, which is op-
tionally available (see Replacement parts
Accessories"), is suitable for vacuuming
large dirt particles.
1. Place the foam lter (
basket ( 3) (see Wet Vacuuming ).
2. Pull the fabric lter bag over the lter
basket.
Vacuuming fine dust:
Speci c suction processes (e.g. grinding
of paints and lacquers, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk from hazardous dust.
We recommend using the following option-
al lter combination, which is available,
for ne dust (see Spare parts Accesso-
ries ):
1. Fluted lter (11).
2. Fine dust lter bag made of eece
(optionally available see Replacement
parts/Accessories"), which is used in
stead of the paper lter bag (12) in-
cluded in the scope of delivery.

Wet vacuuming

For wet sucking or to suck up water, place
the foam lter (13) on the lter bo on the
motor head (3).
1 2
13) on the lter
1. To avoid tearing the foam lter (13):
- Use only a dry lter
- Before inserting, twist the edge
of the lter slightly and then roll it
back.
2. Suctioning up (draining) water: place
the suction hose (
( 15) into the water tank and suc-
tion up the water.
3. Empty the container immediately after
vacuuming because it is not designed
to store li uids (see Cleaning
nance").
Never reach into the water to
be suctioned up. Danger of
electric shock.
When the container is full, the suc-
tion opening is shut off by a oat,
and suction is then cut off. Switch
the appliance off, remove the plug
from the socket and empty the con-
tainer (see Cleaning
If foam or liquid exits, switch off the
machine immediately.

Blowing

To use the blower function, screw the
vacuum hose (1 ) on to the nozzles on the
engine housing (3) (operation without the
use of lters).

Powertool vacuuming

The Powertool hose can be used for
the following:
• Cleaning hard-to-reach places or sensi-
tive equipment.
• Connecting powertools for vacuuming
dust off.
18) on the handle
ainte-
aintenance).