Wet Vacuuming - Parkside PWD 30 A1 Originalbetriebsanleitung

If the sealing lip of the folded filter
(14) does not spontaneously touch
the motor head (2), turn the cover
plate (14a) a little without force un-
til the inside latch of the cover plate
(14a) releases the folded filter (14).
You can now lightly push the folded
filter (14) onto the motor head (2).
2. Lock the folded filter (14) by turning
the cover plate slightly (14a) in a
clockwise direction:
Locking the cover plate
Unlocking the cover plate
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the addition-
al use of a paper filter bag (brown).
1. Fit the fluted filter (14).
2. Fold the side flaps on the paper filter
bag (15) down on the perforation.
3. Unfold the paper filter bag (15) com-
pletely and invert it over the internal suc-
tion fitting of the suction connection (10).
The sealing ring on the filter bag open-
ing must completely enclosed the arm
on the suction nozzle.
A fine dirt filter bag made of micro
filter fleece is also optionally avail-
able, which can be used in place
of the included paper filter bag (see
"Replacement parts/Accessories").
Vacuuming fine dust:
Certain suction processes (e.g. sanding
paints and varnishes, drilling walls, grind-
GB
ing or drilling hard wood) can pose a risk
due to hazardous dust.
We recommend using the following option-
al filter combination, which is available, for
fine dust (see "Spare parts/Accessories"):
1. Fluted filter (14).
2. Fine dust filter bag made of fleece
(optionally available see "Replacement
parts/Accessories"), which is used in
stead of the paper filter bag (15) in-
cluded in the scope of delivery.

Wet vacuuming

1. For wet suction or for vacuuming water,
place the folded filter (14) onto the fil-
ter basket (2b) of the motor head (2).
Ensure that the folded filter (14) is
clean. If this is not the case, clean it
under running water.
If the sealing lip of the folded filter
(14) does not spontaneously touch
the motor head (2), turn the cover
plate (14a) a little without force un-
til the inside latch of the cover plate
(14a) releases the folded filter (14).
You can now lightly push the folded
filter (14) onto the motor head (2).
2. Lock the folded filter (14) by turning
the cover plate slightly (14a) in a
clockwise direction:
Locking the cover plate
Unlocking the cover plate
3. Suctioning up (draining) water: place
the suction hose (
dle (
17) into the water tank and
suction up the water.
IE NI CY
20) on the han-
11