Herunterladen Inhalt Inhalt Diese Seite drucken

Washing Instructions; Maintenance - Ossur UNLOADER ONE LITE Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für UNLOADER ONE LITE:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
• Ideal trimline is at least one set of holes beneath sleeve slot.
• Reattach DFS strap to hook tab, making sure it is fully fastened.
• Insert hook tab into sleeve slot, hook into shell and pull lightly to
secure in place. NB: If unable to trim straps immediately, attach to
appropriate set of holes and thread into sleeve slot.
Assessment of Strap Tension (Figure 12–13)
• Fasten calf strap above widest part of calf.
• Push down SmartDosing
• Turn dial clockwise until yellow display is at mid-indicator.
• Ask user to sit down, stand up, and take a few steps.
• User should feel strap tension without discomfort at mid-indicator
setting.
• If indicator is at top setting without proper tension, straps will need
to be trimmed further.
• Indicator at bottom setting means strap has likely been cut too short.
NB: Straps will elongate slightly during use and may need to be adjusted
further after a few weeks of use. DFS straps with alligator clips are
available as an accessory, see QRC 1241_003 for application.
Final Check
Verify positioning of brace when adjustment procedure has been
completed.
Doff ing
Pull out SmartDosing
simultaneously, then Calf Strap.
Remove brace by gently pulling on hinge and opposite lower edge of
brace.
RANGE OF MOTION ADJUSTMENT (ROM)
The device comes with a 0° extension stop installed.
Flexion/Extension Stop accessory kit is available under item number
B-301040047.
Note: If extension stop is modified, DFS strap tension needs to be
adjusted accordingly.

WASHING INSTRUCTIONS

Hand wash using mild soap and rinse thoroughly. For machine wash, use
a wash bag, and program for delicate wash. Air-dry only. Do not tumble
dry or use bleach.

MAINTENANCE

• For safety reasons, hinge should only be disassembled by a certified
practitioner.
• Clean dirt from hinge using tap water and/or compressed air.
• Avoid contact with salt water or chlorinated water. If such contact
occurs, rinse well with tap water and air dry.
• Regular cleaning will ensure hinge, sleeve, straps, and pads are in
optimum working order.
PRODUCT MATERIAL LIST
Thermoplastic elastomer, polypropylene, nylon, polyurethane, polyester,
aluminum, stainless steel, cyanoacrylate.
dial, and ask user to slightly bend knee.
®
dial to release, loosen both DFS Straps
®
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis