Maintenance And Cleaning; Disposal - Parkside PKHAP 20-Li A1 Originalbetriebsanleitung

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always switch the appliance off and
remove the battery before carrying
out any work on the appliance.
The appliance is maintenance-free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
■ Never allow liquids to get into the appliance .
■ Clean the tool holder
♦ To do this, pull the locking collar
and pull the dust protector cap off the tool
holder .
♦ Before fitting a tool into the tool holder
grease it lightly .
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
NOTE
► Replacement parts not listed (such as batteries,
switches) can be ordered via our Service
hotline .
WARNING!
■ If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards .
PKHAP 20-Li A1
regularly .
backwards
,

Disposal

The packaging is made from environmen-
tally friendly material and can be disposed
of at your local recycling plant .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Do not dispose of batteries in your
normal household waste!
Defective or worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC .
Take the battery pack and/or appliance to a near-
by collection facility .
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product .
GB │ MT │ ■
37