General Power Tool Safety Warnings; Work Area Safety - Parkside PKHAP 20-Li A1 Originalbetriebsanleitung

Noise emission value:
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically as follows:
Hammer-drilling:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Hammer-drilling (main handle):
a = 5 .677 m/s , K = 1 .5 m/s
2
h, AG
(additional handle): a
h, AG
K = 1 .5 m/s
2
WARNING!
► The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons . The specified
vibration emission value can also be used to
make an initial exposure estimate .
The vibration level varies depending on the
use of the power tool and may, in some
cases, be higher than the value specified in
these instructions .
PKHAP 20-Li A1
L = 93 .6 dB(A)
pA
3 dB
L = 104 dB(A)
WA
3 dB
2
= 6 .334 m/s ,
2
NOTE
► Try to keep the vibration loads as low as
possible . Measures to reduce the vibration
load are, e .g . wearing gloves and limiting the
working time . Wherein all states of operation
must be included (e .g . times when the power
tool is switched off and times where the power
tool is switched on but running without load) .
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery
operated (cordless) power tool .

1 . Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
b) Do not operate power tools in explosive atmos­
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes .
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control .
GB │ MT │ ■
31