Maintenance And Cleaning; Disposal - Parkside PBH 1050 C3 Originalbetriebsanleitung

Maintenance and cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■ Never permit liquids to enter inside the appliance.
■ Use a soft, dry cloth to clean the housing.
■ Clean the tool holder
CAUTION! PRELOADING!
♦ To do this, pull the locking collar
and pull the dust protector cap
holder .
♦ Before fitting a tool into the tool holder
grease it lightly.
WARNING!
► If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline.
PBH 1050 C3
regularly:
backwards
off the tool
,

Disposal

The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling
plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU
requires that worn-out power tools be
collected separately and recycled in an environ-
mentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the
appliance.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary. The pack-
aging material is labelled with abbreviations (a)
and numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites.
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
GB │ IE │ 9 ■