Teaching-In To The Access Point (Alternative) - HomeMatic IP HmIP-SWDM Montage- Und Bedienungsanleitung

Start-up
5.1.2

Teaching-in to the Access Point (alternative)

First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, please re-
fer to the Homematic IP User Guide, available for
download
www.homematic-ip.com.
To integrate the device into your system and to enable
control via the free Homematic IP app, you must connect
the device to your Homematic IP Access Point first.
To connect the device, please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item "Teach-in device".
Loosen the electronic unit (B) from the bracket
•
(A) by pushing it upwards and removing it to the
front (see figure 2).
• Remove the insulation strip from the battery
compartment (F) of the window / door contact.
Teach-in mode remains activated for 3 minutes.
42
in the download area of